Wish List

Ultralight TR-DUP tray extension to add second handle. The TR-DUP was recently redesigned and was made to add a second TR-DH style handle to the TR-D tray although it will fit any tray and AC-H style handle as well. It is 3 1/4" long and 1/4" thick with one 1/4" threaded hole and one 3/8" hole and two small holes at the end for attaching it to a tray with the included machine screws. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-DUPB tray extension with block to add second handle. The TR-DUPB was recently redesigned and was made to add a second TR-DH style handle to the TR-D tray although it will fit any tray and AC-H style handle as well. Included is a 1" x 3/4" x 1/2" block which is used to drop the extension down to allow extra room to hold camera. It is 3 1/4" long and 1/4" thick with one 1/4" threaded hole and one 3/8" hole and two small holes at the end for attaching it to a tray with the included machine screws. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-DUPL tray extension to add second AC-H style handle. The TR-DUPL was designed to add a second AC-H handle to the TR-DM tray but will work on the TR-D as well. It is 4 1/4" long and 3/8" thick with one 3 3/8" long 3/8" slot and two small holes at the end for attaching it to a tray with the included machine screws. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-DUPLXL tray extension to add second AC-H style handle. The TR-DUPLXL is extra long and was designed to add a second AC-H handle to the TR-DM tray but will work on the TR-D as well. It is 5 1/4" long and 3/8" thick with one 3 3/8" long 3/8" slot and two small holes at the end for attaching it to a tray with the included machine screws. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-GP GoPro single handle tray. The TR-GP was designed to be a single handle GoPro tray using our TR-DH style handle. The tray is 4 1/2" long, 1" wide and 1/4" thick. It has a plastic GoPro tripod mount attached and two 1/4"-20 threaded holes and one 3/8" hole. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel. The bolt to hold the GoPro in place is not included.

Ultralight TR-GPDXL GoPro extra long double handle tray. The TR-GPDXL was designed to be an extra long double handle GoPro tray using our TR-DH style handle. The tray is 10 1/2" long, 1" wide and 1/4" thick. It has a plastic GoPro tripod mount attached and three 1/4"-20 threaded holes and one 3/8" hole. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel. The bolt to hold the GoPro in place is not included.

Ultralight TR-GPD GoPro double handle tray. The TR-GPD was designed to be a double handle GoPro tray using our TR-DH style handle. The tray is 8 1/2" long, 1" wide and 1/4" thick. It has a plastic GoPro tripod mount attached and three 1/4"-20 threaded holes and one 3/8" hole. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel. The bolt to hold the GoPro in place is not included.

Ultralight TR-GPDW GoPro/video double handle camera wing tray. The TR-GPDW was designed as a double handle GoPro/video camera wing tray. Included is a GoPro tripod mount that can be removed for video cameras using a 1/4" threaded mounting hole. The wing style places the camera forward to give more room especially if flip filters are used. The tray is 10" long, 2 3/4" wide in the center, 1 1/4" wide at the ends and 1/4" thick. It has five 1/4" threaded holes, two 1/4" holes and three 3/8" hole. Any ULCS handle will fit the TR-GPDW. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight TRI-LEG adjustable tripod leg with stabilizer. The TRI-LEG is a adjustable leg for tripods. The leg has a BA-TT ball adapter on one end and a pointed foot with stabilizer on the other. It adjusts from 12" to 19" measured from bottom of stabilizer to O-ring. There is a large round plastic knob that can be tightened or loosened for easy adjustment. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the hardware is 316 stainless steel.

Ultralight TRIPOD pan and tilt with legs. The TRIPOD is a combination of our TRI-THC pan and tilt head and three TRI-LEG's. It stands approximately 17" to 23" tall depending on how far the legs are placed outwards. It has a comfortable and easy to use blue rubber grip handle. The pad where the camera sits is 2" x 2" and has a 1/4"-20 x 3/4" captive bolt with thumb knob for attaching the camera to the tripod. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the hardware is 316 stainless steel.

Ultralight TRI-TRAY universal mounting platform for video or still cameras. The TRI-TRAY was designed to fit most any video or still camera on the market and to be used as a wide tripod platform. The tray is 6" x 4" with five 2 1/4" long 1/4" slotted holes, four 3/8" threaded holes and ten 1/4" threaded holes plus twelve small machine screw holes to attach out BA-TT in six different places. Uses either the BA-TT, BA-MT and BA-HB. Included are three 1/4"-20 x 3/4" captive bolts and six 1/8" plastic washers. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the hardware is 316 stainless steel.

Ultralight TRI-THC tripod pan and tilt head. The TRI-THC is the complete tripod head without any legs. It uses our AC-TRI clamp for the lower part that holds the legs and attached to it is a pan and tilt assembly. It has a comfortable and easy to use blue rubber grip handle. The pad where the camera sits is 2" x 2" and has a 1/4"-20 x 3/4" captive bolt with thumb knob for attaching the camera to the tripod. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the hardware is 316 stainless steel.

Ultralight TR-LB universal light duty L bracket. The TR-LB is a light duty universal "L" shaped mounting bracket that has many uses. It is 2 3/4" x 3 3/4". The shorter side has three 1/4" threaded holes and the longer side has a 1 1/4" long 1/4" wide slot. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight TR-HB universal heavy duty L bracket. The TR-HB is a heavy duty universal "L" shaped mounting bracket that was designed as support brackets for our TR-SLDK camera sled kit but still has many other uses. It is a 3" x 4" angled aluminum. The shorter side has three 1/4" threaded holes and the longer side has two 1 1/2" long 1/4" wide slots. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight TR-MB monitor bracket that fits the TRI-TRAY. The TR-MB was designed to be attached to a TRI-TRAY to hold a monitor and is part of the TR-MBK monitor package. It is 11" long, 1" wide and 1/4" thick with a 4" long 1/4" slot, four 1/4" threaded holes and two 1/4" holes. Hardware included is two 1/4"-20 x 5/8" allen bolts, two flat washers and two split washers. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the hardware is 316 stainless steel.

Ultralight TR-SBLD large single handle camera tray. The TR-SBLD was designed as a double handle camera tray for large sized camera housings. Made to use with camera housings with two or three 1/4" mounting holes. The tray is 14 3/8" long, 1 1/4" wide and 3/8" thick. It has two 3" long 1/4" slots, two 3 1/2" long 3/8" slots, two 2 3/8" long 3/8" slots, ten 1/4" threaded holes and one center 1/4 hole. Our AC-H handle is best used with the TR-SBLD. Included is the mounting hardware consisting of two 1/4"-20 x 3/4" bolts with thumb knob, two 6mm x 35mm bolts with thumb knobs and two 1/8" plastic washers. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TSTICK pointer stick with lanyard. The TSTICK is designed to be used as a pointer stick or stabilizer stick to stay off the bottom while taking pictures. It is a 16" x 1/4" rod with a 4 1/4" x 1/2" handle. At one end of the handle is a 1/4"-20 threaded hole so a BA-HB ball adapter (not included) can be mounted to it. Once the ball adapter is attached a GoPro or small light can be used with the use of a clamp. On the other side of the handle is a 8" blue wrist lanyard. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight AC-CB-2pk short coarse thread clamp bolts. The AC-CB-2pk is a pack of 2 replacement bolts for our AC-CS, AC-CSF, AC-TCS, AC-CSSK, AC-TCSJK clamps. They are 1/4"-20 x 2 1/4" and made of 316 stainless.