Wish List

Ultralight TSTICK pointer stick with lanyard. The TSTICK is designed to be used as a pointer stick or stabilizer stick to stay off the bottom while taking pictures. It is a 16" x 1/4" rod with a 4 1/4" x 1/2" handle. At one end of the handle is a 1/4"-20 threaded hole so a BA-HB ball adapter (not included) can be mounted to it. Once the ball adapter is attached a GoPro or small light can be used with the use of a clamp. On the other side of the handle is a 8" blue wrist lanyard. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight AC-CB-2pk short coarse thread clamp bolts. The AC-CB-2pk is a pack of 2 replacement bolts for our AC-CS, AC-CSF, AC-TCS, AC-CSSK, AC-TCSJK clamps. They are 1/4"-20 x 2 1/4" and made of 316 stainless.

Ultralight AC-CB28-2pk short fine thread clamp bolts. The AC-CB28-2pk is a pack of two replacement bolts for AC-CSF-28 clamps. They are 1/4"-28 x 2" and made of 316 stainless.

Ultralight AC-CBL-2pk long coarse thread clamp bolts. The AC-CBL-2pk is a pack of 2 replacement bolts for AC-CSB, AC-CSL, AC-CSLXL clamps. They are 1/4"-20 x 2 1/2" and made of 316 stainless.

Ultralight AC-SPR-5pk clamp springs. The AC-SPR-5pk is a pack of 5 springs that fit any Ultralight clamp. They are made of 316 stainless steel

Ultralight AC-WASH-1/8-10pk plastic clamp washers. The AC-WASH-1/8-10pk is a pack of 10 replacement plastic washers. They are used on all Ultralight clamps and many of our trays and other products. They are a 1/8" thick, 1/4" inside diameter and 1/2" outside diameter plastic washer.

Ultralight AC-WASH-1/4-5pk plastic clamp washers. The AC-WASH-1/4-5pk is a pack of 5 replacement plastic washers. They are used on some Ultralight trays, AC-TB bolts and and other products. They are a 1/4" thick, 1/4" inside diameter and 1/2" outside diameter plastic washer.

Ultralight AC-WASH-9/16-5pk plastic Inon strobe washers. The AC-WASH-9/16-5pk is a pack of 5 replacement plastic washers. They are used on the Ultralight AD-IN strobe adapter and BT-IN bolt. They are a 9/16" thick, 1/4" inside diameter and 1/2" outside diameter plastic washer.

Ultralight O-RING-BALL-25pk ball O-rings for arms and ball adapters. The O-RING-BALL 25pk is a pack of 25 replacement rubber O-rings. They are used on all Ultralight arms and ball adapters. The ball O-rings are Buna, Size 209N70

Ultralight O-RING-BALL-12pk ball O-rings for arms and ball adapters. The O-RING-BALL 12pk is a pack of 12 replacement rubber O-rings. They are used on all Ultralight arms and ball adapters. The ball O-rings are Buna, Size 209N70

Ultralight O-RING-BASE-25pk ball O-rings for the AD-1420 and AD-3816 ball adapters. The O-RING-BASE-25pk is a pack of 25 replacement rubber O-rings. They are used on the bottom of many Ultralight base adapters such as the AD-6MM, AD8MM, AD-1420 and AD3816 adapters. The base O-rings are Buna, Size 113N70

Ultralight O-RING-BASE-12pk ball O-ringsfor the AD-1420 and AD-3816 ball adapters. The O-RING-BASE-12pk is a pack of 12 replacement rubber O-rings. They are used on the bottom of many Ultralight base adapters such as the AD-6MM, AD8MM, AD-1420 and AD3816 adapters. The base O-rings are Buna, Size 113N70

Ultralight BT-SBLDUS-2pk imperial bolts for TR-SBLD trays. The BT-SBLDM-2pk is a pack of 2 replacement bolts with thumb knob for our TR-SBLD trays. The bolts are 316 stainless steel, 1/4"-20 x 3/4" with plastic thumb knob pressed onto them and come with a 1/8" plastic washer.

Ultralight BT-SBLDM-2pk metric bolts for TR-SBLD trays. The BT-SBLDM-2pk is a pack of 2 replacement bolts with thumb knob for our TR-SBLD trays. The bolts are 316 stainless steel, 6MM x 20MM with plastic thumb knob pressed onto them and come with a 1/8" plastic washer.

Ultralight BT-SHK camera sled hardware kit for the TR-SLD sled. Hardware to make the TRI-TRAY, TR-LB and TR-SBLD into a skid mounted camera setup.

Ultralight AC-TB-2pk captive bolts for TR-D and TRI-TRAY. The AC-TB-2pk is a pack of 2 replacement bolts with thumb knob for our TR-D and TRI-TRAY trays. The captive bolts are 1/4"-20 x 3/4" with a thumb knob attached and comes with two AC-WASH-1/2. Bolts are 316 stainless and the knob and washer are plastic.

Ultralight AC-TBMO small round knob for AC-MB monitor bracket. The AC-TBMO is a single monitor bracket replacement bolt with a small round plastic knob that fits the AC-MB. The captiva bolt is 1/4"-20 x 3/4" and made out of 316 stainless.

Ultralight AC-TBMO-1/4 large round knob for AC-MBL1/4 monitor bracket. The AC-TBMO-1/4 is a single monitor bracket replacement bolt with a large round plastic knob that fits the AC-MBL1/4. The captiva bolt is 1/4"-20 x 3/4" and made out of 316 stainless.