Wish List

Ultralight BA-TG angled ball adapter that fits the BA-TP base plate. The BA-TG was designed to fit our BA-TP base plate which can be attached to Nauticam, Sea & Sea and Aquatica housing handles. By the use of a 1/4"-20 x 1 1/4" thumb screw it can easily slide onto or off the BA-TP plate under or above the water. The length and angle of the adapter makes it a great choice . It is black in color, made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight BA-TP base plate for the BA-TG and fits Nauticam, Sea & Sea and Aquatica housing handles. The BA-TP was designed to fit be bolted to Nauticam, Sea & Sea and Aquatica housing handles so our BA-TG angled ball adapter could be used. It has two mounting holes that are 1" to 1 1/4" apart and black in color. Made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight BA-TT ball adapter. The BA-TT was designed to be used on our TRI-TRAY to attach arms/legs to make a tripod. It is also the same ball mount on the ends of our DB-CB10 crossbar arm. It is black in color, made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight BA-W2 purple Wedgie 2 ball adapter. The BA-W2 was designed to fit the Wedgie 2 quick release base mount, it is 2" tall and purple in color. It is made out of 6061 T6 aircraft-grade aluminum with Type II anodizing.

Ultralight BA-W2-BK black Wedgie 2 ball adapter. The BA-W2-BK was designed to fit the Wedgie 2 quick release base mount, it is 2" tall and black in color. It is made out of 6061 T6 aircraft-grade aluminum with Type II anodizing.

Ultralight C-15-RB dual 15MM rod clamp. The C-15-RB was designed for 15MM cinema camera rod/rail systems. The dual 15mm holes are spaced 60mm apart, it is 5 7/8" in length and 3/4" square with ten 1/4" -20 threaded holes and a large black plastic knob. They are black in color, made out of 6061 T6 aircraft-grade aluminum with Type Il anodizing and the 1/4"-20 x 1" knob bolt is 316 stainless steel.

Ultralight C-15-RB-HB dual 15MM rod clamp with BA-HB ball mount. The C-15-RB-HB was designed for 15MM cinema camera rod/rail systems and comes with a BA-HB ball adapter. The dual 15mm holes are spaced 60mm apart, it is 5 7/8" in length and 3/4" square with ten 1/4" -20 threaded holes and a large black plastic knob. They are black in color, made out of 6061 T6 aircraft-grade aluminum with Type Il anodizing and the 1/4"-20 x 1" knob bolt and 1/4"-20 x 1 1/2" BA-HB bolt are 316 stainless steel.

Ultralight C-15-RBL-HB extra long triple 15MM rod clamp with BA-HB ball adapter. The C-15-RBL-HB was designed for 15MM cinema camera rod/rail systems and comes with a BA-HB ball adapter. The dual 15mm holes are spaced 60mm apart, it is 5 7/8" in length and 3/4" square with ten 1/4" -20 threaded holes and a large black plastic knob. They are black in color, made out of 6061 T6 aircraft-grade aluminum with Type Il anodizing and the 1/4"-20 x 1" knob bolt and 1/4"-20 x 1 1/2" BA-HB bolt are 316 stainless steel.

Ultralight DB-03 double ball rod arm. The DB-03 is a double ball rod arm. It is 3" from O-ring to O-ring or 4" total length with a 3/8" diameter rod. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-05 double standard ball arm. The DB-05 is the original standard double ball arm design that Ultralight is known for. It is 5" from O-ring to O-ring or 6" total length. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-06 double ball rod arm. The DB-06 is a double ball rod arm. It is 6" from O-ring to O-ring or 9" total length with a 3/8" diameter rod. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-08 double ball standard arm. The DB-08 is the original standard double ball arm that Ultralight is known for. It is 8" from O-ring to O-ring or 9" total length. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-09 double ball rod arm. The DB-09 is a double ball rod arm. It is 9" from O-ring to O-ring or 10" total length with a 3/8" diameter rod. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-12 double ball standard arm. The DB-12 is the original standard double ball arm that Ultralight is known for. It is 12" from O-ring to O-ring or 13" total length. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-16 double ball standard arm. The DB-16 is the original standard double ball arm that Ultralight is known for. It is 16" from O-ring to O-ring or 17" total length. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-CB10 double ball crossbar arm. The DB-CB10 is a double ball crossbar arm. It is 10" from O-ring to O-ring or 11" total length. The ball at each end is our BA-TT and each has a 1/4" hole. The flat bar is 4 1/2" long, has six 1/4" threaded holes and the center has one 1/4" hole. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III and the hardware is 316 stainless steel.

Ultralight DB-EXT double ball adjustable arm. The DB-EXT is a double ball adjustable arm. It adjusts from 12 1/2" to 19" measured from O-ring to O-ring or 13 1/2" to 20" for total length. The ball at each end is our BA-TT mounted to two flat bars with a long 1/4" slot. Each flat bar has one 1/4" threaded hole and each ball end has one 1/4" hole. There is a large round plastic knob that can be tightened or loosened for easy adjustment. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III and the hardware is 316 stainless steel.

Ultralight GP-TRI-MOUNT GoPro mount. The GP-TRI-MOUNT is tripod mount designed to hold a GoPro. It is plastic with 1/4" mounting hole in the bottom. The hardware included is 316 stainless steel. The bolt that holds the GoPro in places is not included