Wish List

Ultralight LL-YS YS style light and strobe mount with 1/2" Locline. The LL-YS was designed to hold a YS style light or small strobe using a 5/16" hole. The LL-YS comes with a section of 1/2" Locline attached to it. To attach it to a 3/4" section of Locline an adapter like our LL-AD would be needed to go from 1/2" to 3/4". It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight LL-AD Locline adapter from 1/2" to 3/4". The LL-AD is a adapter used to go from 1/2" to 3/4" Locline. It is black plastic, easy to use and can be snapped on or off when needed.

Ultralight SB-04-BCK long ball mount kit for twin buoyancy arms. The SB-04-BCK is the SB-04 ball mount that comes with two plastic washers. It is designed to attach to the AC-CSLSK2 or the AC-CSKXLSK2 clamps so two large buoyancy arms can be mounted side-by-side over a camera. It is black in color, 4" in length, has a ball mount on one end and a 1/8" thick flat end with a 1/4" hole on the other end. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing. Two 1/2 x 1/4 x 1/8 plastic washers are supplied with the kit.

Ultralight SB-04 long ball mount. The SB-04 was designed as a universal ball mount that can be bolted between a handle and ball or used to attach to something to be used as an additional ball mount. It is also part of the SB-04-BCK kit. It is black in color, 4" in length, has a ball mount on one end and a 1/8" thick flat end with a 1/4" hole on the other end. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight SB-11 single ball flat arm. The SB-11 was designed to be an adjustable universal arm with a ball at one end especially because of the 7" long 1/4" slot. The flat arm is part of our adjustable tripod arms with a BA-TT ball mount attached to one end. Total length is 11" and it has one 1/4" threaded hole at the non-ball end. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight SBSS-5 YS style single ball arm. The SBSS-5 is a YS style single ball standard arm. It was made for Sea & Sea strobes and lights using the YS style mount. It has a 5/16" and 3/8" hole on one end, 1" ball on the other and measures 5" from O-ring to the 5/16" hole with a 6" total length. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight SBSS-5RB YS style single ball arm with large knob. The SBSS-5RB is like our standard DB-05 arm but with a single ball on one end a 1/2" thick flat surface on the other with two holes. It measures 5" from O-ring to the 5/16" hole with a 6" total length. The two holes are 5/16" and 3/8" diameter. It comes with a large round knob pressed onto a 1/4"-20 x 1" bolt. By attaching the arm using the knob you will not only extend the reach of the ball but will have the ability to swivel the arm side to side. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight SBSS-8 YS style single ball arm. The SBSS-8 is a YS style single ball standard arm. It was made for Sea & Sea strobes and lights using the YS style mount. It has a 5/16" and 3/8" hole on one end, 1" ball on the other and measures 8" from O-ring to the 5/16" hole with a 9" total length. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight SBSS-8RB YS style single ball arm with large knob. The SBSS-8RB is like our standard DB-05 arm but with a single ball on one end a 1/2" thick flat surface on the other with two holes. It measures 8" from O-ring to the 5/16" hole with a 9" total length. The two holes are 5/16" and 3/8" diameter. It comes with a large round knob pressed onto a 1/4"-20 x 1" bolt. By attaching the arm using the knob you will not only extend the reach of the ball but will have the ability to swivel the arm side to side. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-CMB cinema all-purpose universal monitor bracket and accessory tray. The TR-CMB was designed so multiple 5” to 7” monitors and other accessories can be attached with a number of mounting options for camera assistants to create their video setups. With the endless mounting possibilities the tray provides it will work equally as well for anything filmmaking making it an excellent choice for DIT’s or broadcast. Due to how quick it can be adapted and the sturdiness of the tray, even grippers will find it extremely useful for quick and sturdy rigging. The tray is 18" long, 1 ¼” wide and 1/4" thick. It has three mounting locations for the ARRI 3/8” with locating pins, two 3 1/2” long by ¼” wide slots, six ¼” threaded holes, and two ¼” countersunk holes at each end to attach the TR-CMBH handle extensions. The tray is black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing. To make this a caged camera/monitor tray and the best possible version of itself order our CDTK-LDHMM and have the best of both worlds.

Ultralight TR-CMBH handle extension bracket for the TR-CMB accessory tray. The TR-CMBH handle bracket was designed to be added to the TR-CMB tray so the Ultralight AC-H1/4XL style handle could be added creating a complete combo setup that can be easily carried. The handle bracket is 4” long, 1 ¼” wide and ¼” thick, and has a 3/8” hole for attaching the handle to it. Adding to the versatility of the bracket it has one ¼” center pivot hole and one 1/4” curved slot making it swingable when mounted. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-D small single handle camera tray. The TR-D was designed as a single handle camera tray for small sized point and shoot housings. Made to use with camera housings with one 1/4" mounting hole. It comes with a 1/4"-20 captive bolt with thumb knob and 1/4" plastic washer and has a 4" long raised backstop which holds the housing in place when mounted. The tray is 8 1/2" long, 2" at the widest point, 1" at the narrowest and 1/4" thick. It has three 1 1/2" long 1/4" slot and one 3/8" hole, two 1/4" threaded holes and two holes on one end to mount an extension for a second handle . Made to use with camera housings with one 1/4" mounting hole. Any ULCS tray extension or handle will fit the TR-D. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-DH blue grip handle. The TR-DH handle is designed to fit most any Ultralight tray. It is 4 1/4" tall with blue rubber grip, no ball mount and 1/4" threaded mounting rod with 1/4" acorn nut. The main handle is black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-DH-BK black grip handle. The TR-DH handle is designed to fit most any Ultralight tray. It is 4 1/4" tall with black rubber grip, no ball mount and 1/4" threaded mounting rod with 1/4" acorn nut. The main handle is black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-DHB blue grip handle with ball. The TR-DHB handle is designed to fit most any Ultralight tray. It is 4 1/4" tall with blue rubber grip and BA-HB ball mount attached with 1/4"-20 x 1 1/2" allen bolt. It uses a 1/4" threaded mounting rod and 1/4" acorn nut to attach to a tray. The main handle is black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-DHB-BK black grip handle with ball. The TR-DHB handle is designed to fit most any ULCS tray. It is 4 1/4" tall with black rubber grip and BA-HB ball mount attached with 1/4"-20 x 1 1/2" allen bolt. It uses a 1/4" threaded mounting rod and 1/4" acorn nut to attach to a tray. The main handle is black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-DM medium single handle camera tray. The TR-DM was designed as a single handle camera tray for medium sized camera housings. Made to use with camera housings with two or three 1/4" mounting holes. The tray is 9" long, 1 1/4" wide and 1/4" thick. It has one 4 3/8" long 1/4" slot and one 2 1/8" long 3/8" slot, two 1/4" threaded holes and two holes on one end to mount an extension for a second handle. Any ULCS tray extension or handle will fit the TR-DM. Included is the mounting hardware consisting of two 1/4"-20 x 5/8 bolts with thumb knob, two 12/24" x 5/8" philip screws and two 1/8" plastic washers. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TR-DM2 medium double handle camera tray. The TR-DM2 was designed as a double handle camera tray for medium sized camera housings. Made to use with camera housings with two or three 1/4" mounting holes. The tray is 13" long, 1 1/4" wide and 1/4" thick. It has one 4" long 1/4" slot and two 2 3/8" long 3/8" slots, four 1/4" threaded holes. Any ULCS handle will fit the TR-DM2. Included is the mounting hardware consisting of two 1/4"-20 x 5/8 bolts with thumb knob, two 12/24" x 5/8" philip screws and two 1/8" plastic washers. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel. Double handle camera tray 13" long with 1/4" mounting slot and mounting hardware (1/4"-20, 12/24" and plastic washers.)